Midiplus Routist Series USB Audio Interface (Routist RS Routist R1 Routist R2 Routist R4)

Midiplus Routist Series USB Audio Interface (Routist RS Routist R1 Routist R2 Routist R4)

The Midiplus Routist Series consists of compact, affordable USB audio interfaces tailored for podcasters, mobile creators, and live streamers. They feature built-in OTG connectivity for direct mobile streaming, plug-and-play macOS compatibility, and low-latency ASIO drivers for Windows

ROUSTIST R2 

Routist R2 is 1 in 2 out USB audio interface. You can supply 48V phantom power to your condenser micrphone with only USB bus power supply

1 in/2 out USB audio interface
You can connect to your mobile phone through the built-in OTG port, providing you with a faster and more convenient live streaming experience.

Support 24bit/96kHz
Support Windows low-latency ASIO driver and will work straight away without needing to install any drivers on macOS.

1 XLR/TRS
1 XLR/TRS combo input for microphone, line-level device or instrument (guitars or basses)

Hardware Features :

• USB port: Connect to a computer to transmit data and power supply.
• OTG port: Connect to a mobile phone to transmit digita audio signals.
• Monitor: Connect to the active speakers to monitor the output signals.
• Phone: Connect to headset jack of mobile phone, for live streaming.
• XLR/TRS Combo Input: Connect the microphone through XLR, connect line-level device or instrument (guitars or basses) through TRS jack.
• 48V Switch: Turn on/off the phantom power supply of the XLR input, the button light is on when it is turned on.  
• Instrument/Line Switch: When the button lights on, the TRS input can be connected to an instrument such as an electric guitar, and when off, it is a line-level input.  
• Input Level LED: Indicate the XLR/TRS input level in different colors, lights red when clipping.
• USB Status LED: Lights on when connected to the computer.
• OTG Status LED: Lights on when connected to the mobile phone.
• Output Level LED: Indicate the output level in different colors, lights red when clipping.
• Headphone Outputs: Connect 2 headphone.
• Input Gain Control: Control the XLR/TRS input's gain level.
• Monitor Control: Control the monitor output level.
• Headphone Control: Control the dual headphone outputs level.

Specifications :

• Model: Routist R2 GEN II
• Bit depth/Sample rate: 24bit/96kHz
• I/O: 1 x XLR/TRS Combo Input, 1 x 1/8" Phone Jack, 2 x 1/8" Headphone Outputs, 1 x 1/8" Monitor Output, 1 x USB C port, 1 x USB C OTG port
• Phantom Power: 48V
• Buttons: 48V Switch, Instrument Switch
• Knobs: Gain, Monitor, Headphone
• Dimensions: 5.03 x 4.80 x 1.49 (inch)
• Accessory: Quick Start Guide, TRRS 1/8" to TRRS 1/8" cable, USB A to USB C cable

Routist RS 

Routist RS GEN II is a 2 in 2 out USB audio interface,with brilliant lighting effects. You can supply 48V phantom power to your condenser microphone with only USB bus power supply.

2 in/2 out USB audio interface
You can connect to your mobile phone through the built-in OTG port, providing you with a faster and more convenient live streaming experience.

Support 24bit/96kHz
Support Windows low-latency ASIO driver and will work straight away without needing to install any drivers on macOS.

1 XLR/TRS

1 XLR/TRS combo input and 1 TRS input for connecting microphone, line-level device or instrument (guitars or basses)

Hardware Features :

• RGB Light Ring: Showing different lighting effects according to the RGB Light Ring mode
• Monitor Control: Control the monitor output level
• input 1 Gain Control: Control the input 1's gain level
• input 2 Gain Control: Control the input 2's gain leve
• Headphone Control: Control the dual headphone outputs level
• Headphone outputs: Connect 2 headphones
• 48V Switch: Turn on/off the phantom power supply of the XLR input 1  
• Instrument/Line Switch: Switch the inputs to the Hi-Z mode
• INST 1: Switch the input 1 into Hi-Z mode
• INST 2: Switch the input 2 into Hi-Z mode
• Mode Switch: Switch the mode of RGB Light Ring
• input 1: Connect the microphone through XLR, connect line-level device or instrument (guitars or basses) through TRS jack
• input 2: Connect line-level device or instrument (guitars or basses)
• Phone: Connect to headset jack of mobile phone, for transmit analog audio signals
• Monitor: Connect to the active speakers to monitor the output signals
• OTG port: Conncet to a mobile phone to transmit digital audio signals
• USB port: Connect to a computer to transmit data and power supply

Specifications :

• Model : Routist RS GEN II
• Bit depth/Sample rate : 24bit/96kHz
• I/O : 1 x XLR/TRS Combo Input, 1 x 1/4" TRS Input, 1 x 1/8" Phone Jack, 2 x 1/8" Headphone Outputs, 1 x 1/8" Monitor Output, 1 x USB C port, 1 x USB C OTG port
• Phantom Power : 48V
• Buttons : 1 x 48V Switch, 2 x Hi-z Switch, 1 x Ring ramp mode Switch
• Knobs : Input Gain, Monitor, Headphone
• Dimensons : 120 × 120 × 47(mm)
• Accessory : Quick Start Guide × 1, TRRS 1/8" to TRRS 1/8" cable × 1, USB C to USB C cable × 1

Routist R4

ROUTIST R4 is a 2 in 2 out USB audio interface , equipped with DC input Jack to make its work more stable.

Support 24bit/192kHz audio resolution

• Zero latency Stereo/Mono Direct monitoring.
• Connect to your mobile phone through OTG or 3.5mm jack.
• High Speed USB 2.0 and bus powered.
• Independent monitor output volume and headphone volume control.

Dual OTG and one Phone jack

Support up to 3 mobile phones for live streaming at the same time. Let you easily deal with a variety of live broadcast or live recording.

Dual headphone output
3.5 mm stereo output, connect to your headphone

Hardware Features :

• Screen: Displays the input/output/OTG level.
• Input 1 & 2 gain control: Adjusts the gain level of the microphone, instrument, or line input. Rotate counterclockwise to reduce the gain level and clockwise to increase the gain level.
• Headphone 1 & 2 level control: Adjusts the headphone output level. Rotate counterclockwise to reduce the level, and rotate clockwise to increase the level.
• Monitor level control: Adjusts the monitor outputs level. Rotate counterclockwise to reduce the level and clockwise to increase the level.
• Instrument input switch button: Switches the instrument/line input of the 6.35mm input.
• 48V phantom power switch: Turns on the 48V phantom power supply.
• Direct monitoring Control: Stereo direct monitoring when the button lights white, and Mono direct monitoring when the button lights blue. When the button is off, it means Direct monitoring is turned off.

Specifications :

• Model: Routist R4
• Bit depth/Sample rate: 24 bit /192kHz
• Screen: LCD
• I/O: 2 x Mic/Line/Hi-Z Combo Input, 2 x 1/8" Headphone Output, 1 x 1/8" Monitor Outputs, 1 x 1/8" Phone jack, 2 x OTG port, 1 x Type-C port, 1 x DC input
• Buttons: 2 x Hi-Z Switch, 2 x 48V Switch, 1 x Direct Monitor Switch
• Knobs: 2 x Input Gain control, 1 x Monitor Level control, 2 x Headphone Volume control
• Dimensions: 152 x 113 x 41 (mm)
• Accessories: 1 x DC to USB Cable, 1 x USB Cable, 1 x Quick Start Guide, 1 x Information paper, 1 x 1/8" to 1/8" TRRS cable

Routist R1

The ROUTIST R1 is a 2 in 2 out USB audio interface. No external power supply is required. It utilizes USB cable power to provide 48V phantom power for condenser microphones.

24-bit/96kHz audio resolution
Supports low-latency ASIO drivers for Windows and works straight away without needing to install any drivers for Mac.

• One Mic/Line/Hi-Z combo input: Can be connected to microphones, linear devices, or high impedance instruments such as guitars/basses.
• OTG port: Can be connected to mobile phones via Type-C cable to provide a faster and more convenient live broadcasting experience.
  Support earphone input/output: 3.5mm headphone jack can be connected to TRRS earphone, providing greater flexibility for equipment connection.

New Control Panel
By setting the Combo interface INST / LINE IN, you can switch the input method of various devices. And also control the amount of gain of the headset interface to adapt to different signal sources.

Hardware Features :

• Input gain: Adjust the gain level of microphone, instrument or line input. Rotate counterclockwise to reduce the gain level and clockwise to increase the gain level
• Headphone level control: Adjust the headphone output level rotate counterclockwise to reduce the level, and rotate clockwise to increase the level.
• Headphone output: 3.5 mm stereo output, connect to your headphone or TRRS earphone.
• Mic/Line/Hi-z combo input: Connect microphone via XLR or use the 6.35mm jack to connect your instrument (such as electric guitar) or line input
• 48V phantom power switch: Turn on 48V phantom power supply
• USB port: Connect to computer for power supply and data transmission
• OTG port: Connect to your mobile phone via the Type-C cable
• 48V phantom power indicator: When the 48V phantom power is turned on, the red light will illuminate.
• Earphone input signal indicator: When there is input signal from the earphone, the white light will illuminate.
• Input signal indicator: When there is input signal from the combo, the white light will light up and clip the red light will illuminate.
• Output signal indicator: When there is output signal, the white light will illuminate.
• USB indicator: When connect to the computer, the white light will illuminate.
• OTG indicator: When connect to the mobile phone, the white light will illuminate.