Audio Technica AT-VM95C Dual Moving Magnet Turntable Cartridge Pin - Blue (ATVM95C)

Audio Technica AT-VM95C Dual Moving Magnet Turntable Cartridge Pin - Blue (ATVM95C)

AT-VM95C
This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

Specifications :

• Frequency Response : 20-20,000 Hz
• Channel Separation : 18 (dB at 1 kHz)
• Vertical Tracking Angle : 23°
• Vertical Tracking Force : 1.8-2.2 g (2.0 g standard)
• Stylus Construction : Bonded round shank
• Recommended Load Impedance : 47,000 ohms
• Coil Impedance : 3.3 k ohms (1 kHz)DC Resistance : 485 ohms
• Coil Inductance : 550 mH (1 kHz)Output Voltage : 4.0 mV (1 kHz, 5 cm/sec.)
• Output Channel Balance : 2.5 dB (1 kHz)Stylus Shape : 0.6 mil conical
• Cantilever : Aluminum pipe
• Static Compliance : 17 x 10 – 6 cm / dyne
• Dynamic Compliance : 6.5 x 10 – 6 cm / dyne (100 Hz)
• Mounting : Half-inch
• Cartridge Weight : 6.1gDimensions : 17.2 mm (0.68") H x 18.9 mm (0.74") W x 28.3 mm (1.20") D
• Accessories Included : Two 11 mm installation screws, two 8 mm installation screws, two washers
• Model : AT-VM95C
• Mounting Feature : Half-inch mount
• Recommended Load Capacitance : 100 to 200 pF
• Replacement Stylus : AT-VMN95C
• Stylus Size : 0.6 mil
• Type : VM Stereo Dual Magnet
• Weight : 6.1 g (0.22 oz)
• Wire Used for Coil : T.P. Copper

Features :

• VM95 Series dual magnet cartridge with 0.6 mil conical stylus
• Aluminum cantilever
• Specially wound coils increase output voltage
• Durable low-resonance polymer housing
• Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
• Compatible with any AT-VMN95 replacement stylus